ES Paper and Ink Merchandising started as an offset printer in 2001 in a small town of Calasiao, Pangasinan.In 2004,it expanded its operations in Metro Manila and changed its name to ES Print Media Inc.
In 2007, it started importation of various Advertising Equipment and Multi-Media. Large Format Printers, Cutter plotters, Laser engravers and cutters, Direct-to-Garment Printers, LED Displays and others.
At present, ES Print Media Inc. composed of strong 190 employees with branches in Naga City, Bacolod City, Cebu City, Cagayan de Oro City, Davao City and Zamboanga City.
We are committed to deliver.
1. Delete all print jobs in the print queue
2. Turn the printer off.
Note: Make sure the USB cable is connected correctly.
3. Restart your Computer. When the Desktop appears, turn your printer ON, then follow the onscreen instructions.
Note: If the problem continues, turn the printer off again and delete the printer in the list of printers, then disconnect the USB cable from the printer and connect it again.
High-Density Black Ink provides a bolder, richer black on your printed media than regular black ink. The High-Density black ink in the ink tank should be stirred once a week to prevent sedimentation and incorrect colours in your printed media.
No, Ink Chip Units are not reusable. A New Chip unit is included with each new Ink Pack.
You can use them with the SureColor F6270, SureColor F7270, and SureColor F9330 but not with other Epson printers.
No, to refill new ink pack to the ink tank you need to make sure the ink level is equal to 70mm or less than 70mm. The chip is there to alert you on the panel when it’s near and when it’s empty it will show an "x" icon on the panel.
No. The ink level must remain above 2.8 inches (70 mm) from the base of the ink tank at all times. If the ink level falls below 2.8 inches (70 mm), refill the ink as soon as possible. Failing to do so may allow air into the ink system and affect your printouts.
When the message Refill Ink Tank is displayed on the control panel screen and the remaining ink level is greater than 2.8 inches (70 mm) from the base of the ink tank, it is time to replace the ink tank. The ink tank must be replaced because fine dirt, dust, and other foreign material causes the ink tank’s filter to malfunction. The ink tank replacement interval depends on the usage environment and conditions. Contact ES Print Media support for information on replacing components.
You Need a Good Partner. Choose Us